Recycling Bins

Recycling Bins

Trash can systems with two or more bins.

Active filters

$579.00
Elegant and luxurious pull out system ELLETIPI for waste separation, provided with metal sliders for total extraction, and soft closing return mechanism. The buckets are installed inside a stainless steel structure (AISI 430) which is 100% recyclable, as are all its components. The simple lines, the finishes, the materials and processing, render this series the top of the range. It contains a bucket with a special anti-odor lid with a filter (washable cloth that can be regenerated many times using soap and water). You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base with the 8 supplied self-tapping screws is easy and practical.

$586.00
Elegant and luxurious pull out system ELLETIPI for waste separation, provided with metal sliders for total extraction, and soft closing return mechanism. The buckets are installed inside a stainless steel structure (AISI 430) which is 100% recyclable, as are all its components. The simple lines, the finishes, the materials and processing, render this series the top of the range. It contains a bucket with a special anti-odor lid with a filter (washable cloth that can be regenerated many times using soap and water). You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base with the 8 supplied self-tapping screws is easy and practical.

$635.00
Elegant and luxurious pull out system ELLETIPI for waste separation, provided with metal sliders for total extraction, and soft closing return mechanism. The buckets are installed inside a stainless steel structure (AISI 430) which is 100% recyclable, as are all its components. The simple lines, the finishes, the materials and processing, render this series the top of the range. It contains a bucket with a special anti-odor lid with a filter (washable cloth that can be regenerated many times using soap and water). You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base with the 8 supplied self-tapping screws is easy and practical.

$629.00
Elegant and luxurious pull out system ELLETIPI for waste separation, provided with metal sliders for total extraction, and soft closing return mechanism. The buckets are installed inside a stainless steel structure (AISI 430) which is 100% recyclable, as are all its components. The simple lines, the finishes, the materials and processing, render this series the top of the range. It contains a bucket with a special anti-odor lid with a filter (washable cloth that can be regenerated many times using soap and water). You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base with the 8 supplied self-tapping screws is easy and practical.

$293.00

Cabinet trash can system for waste separation that integrates into the kitchen base with a connection to the sides of the drawer and door. ELLETIPI has developed this system that is mainly recommended to manufacturers and artisans during the kitchen realization phase. The structure is made of galvanized metal painted with epoxy powders and replaces the melamine bottom of the drawers and uses the sliders like a pull out tray and to fasten it to the door. The supplied bucket kit fits into the structure. This version was designed for BLUM brand sliders, Intivo/Antaro type; depth module 50cm EU and width module 45 EU.

$315.00

Cabinet trash can system for waste separation that integrates into the kitchen base with a connection to the sides of the drawer and door. ELLETIPI has developed this system that is mainly recommended to manufacturers and artisans during the kitchen realization phase. The structure is made of galvanized metal painted with epoxy powders and replaces the melamine bottom of the drawers and uses the sliders like a pull out tray and to fasten it to the door. The supplied bucket kit fits into the structure. This version was designed for BLUM brand sliders, Intivo/Antaro type; depth module 50cm EU and width module 60 EU.

$312.00
Practical and distinguished waste separation system ELLETIPI supplied with an automatic lid opening system. The sliders are made of filled and reinforced thermoplastic polymers, rendering them indestructible. The main finish for this version is stainless steel (AISI 430). You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base, using the supplied 5 self-tapping screws, is easy and practical.

$284.00
Practical and distinguished waste separation system ELLETIPI supplied with an automatic lid opening system. The sliders are made of filled and reinforced thermoplastic polymers, rendering them indestructible. The main finish for this version is textured aluminum. You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base with the 8 supplied self-tapping screws is easy and practical.

$405.00

Cabinet trash can system for waste separation that completes the kitchen base when fastened to the sides of the base and connected to the door. The door connection is unique and of maximum quality thanks to the innovative 3D adjustment mechanism by ELLETIPI. This product is supplied with all that is needed for the end result. The sliders are completely extractible with soft-closing return mechanism. It is preferable to install this product during the production phase of the kitchen, but it can also be added on existing kitchen bases, following slight modifications. It is produced with metal and filled and reinforced polymer components; that can all be individually 100% recycled. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 45 EU.

$459.00
Cabinet trash can system for waste separation that completes the kitchen base when fastened to the sides of the base and connected to the door. The door connection is unique and of maximum quality thanks to the innovative 3D adjustment mechanism by ELLETIPI. This product is supplied with all that is needed for the end result. The sliders are completely extractible with soft-closing return mechanism. It is preferable to install this product during the production phase of the kitchen, but it can also be added on existing kitchen bases, following slight modifications. It is produced with metal and filled and reinforced polymer components; that can all be individually 100% recycled. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 60 EU.

$283.00
Innovative pull out trash can for waste separation by ELLETIPI. This system was designed and is at its best when installed inside a kitchen base right under the kitchen top; this way it is possible to collect and push waste directly into the bucket with a simple gesture. It is installed on the sides of the base and is extracted manually. This product is supplied with all that is needed for the end result. The sliders are completely extractible with soft-closing return mechanism. It is preferable to install this product in kitchen bases equipped with a large drawer at the base which is connected to the door. It is produced with metal and filled and reinforced polymer components; that can all be individually 100% recycled. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 30 EU.

$291.00
Innovative pull out trash can for waste separation by ELLETIPI. This system was designed and is at its best when installed inside a kitchen base right under the kitchen top; this way it is possible to collect and push waste directly into the bucket with a simple gesture. It is installed on the sides of the base and is extracted manually. This product is supplied with all that is needed for the end result. The sliders are completely extractible with soft-closing return mechanism. It is preferable to install this product in kitchen bases equipped with a large drawer at the base which is connected to the door. It is produced with metal and filled and reinforced polymer components; that can all be individually 100% recycled. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 30 EU.

$105.00
Optional for the cabinet waste bin system for waste separation series BLOCK 2.0 by ELLETIPI. This is a metal shelf made of galvanized metal sheet painted with epoxy powder, that can be fastened on the side of the base with simple supplied shelf braces. This product is good to optimize volumes and allows the storage of cleaning products inside the base. It can easily be detached and extracted for cleaning purposes. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 45 EU.

$127.00
Optional for the cabinet waste bin system for waste separation series BLOCK 2.0 by ELLETIPI. This is a metal shelf made of galvanized metal sheet painted with epoxy powder, that can be fastened on the side of the base with simple supplied shelf braces. This product is good to optimize volumes and allows the storage of cleaning products inside the base. It can easily be detached and extracted for cleaning purposes. The installation is practical and rapid, thanks to the instructions that can be used as a drilling guide for the supplied self-tapping screws. This version was designed for bases with module width 60 EU.

$228.00

Practical and functional system ELLETIPI for waste separation, provided with metal sliders for total extraction. The buckets are installed in a basket made of chrome plated steel wire and all its components are 100% recyclable. The durability and simplicity of this product are its strong points. All containers are equipped with a lid. It is easy to identify and label the type of waste that goes into each bin, using the multicolor resin stickers that were supplied with the lids. You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base, using the supplied 5 self-tapping screws, is easy and practical.

$255.00
Practical and functional system ELLETIPI for waste separation, provided with metal sliders for total extraction. The buckets are installed in a basket made of chrome plated steel wire and all its components are 100% recyclable. The durability and simplicity of this product are its strong points. All containers are equipped with a lid. It is easy to identify and label the type of waste that goes into each bin, using the multicolor resin stickers that were supplied with the lids. You can install these bins in kitchen bases, specifically under the sink. Its installation on the bottom of the kitchen base, using the supplied 5 self-tapping screws, is easy and practical.